Home
Axiom Guitars
Alhambra Guitars
Plug&Play Pickups
Microphones
Headphones & Monitors
Sound Samples
Accessories
Guitars
Guitar Custom Shop
Product Development
Demo Videos
Press
About / Contact
Artists
Orders
New Tools
KAM on Facebook
KAM Dealers
Warranty

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drum MICs

 

To achieve high quality recording and amplification, you need good microphones that are designed for the type of sound source they are applied to.  

 

KAM drum mics are offered as a 7 microphone and accessories package, as well as individually. They are optimized for their intended sound sources and provide an extremely good price / performance value. When applied correctly, they produce results that are on par with today's major label music releases.

 

K/\M D7 set

A seven microphone set ideally suited for recording or amplifying drum sets. The individual microphones can be used in many other applications as outlined in their individual descriptions. 

The set includes; 

bullet

2,  i2n microphones

bullet

2, Omni directional capsules for i2n

bullet

2, Wind screens for i2n

bullet

2, Mics clips for i2n

bullet

1, BD2 mic

bullet

4, ST2 mics

bullet

5, Drum rim mounting brackets

bullet

7, Thread adaptors (not pictured) 

MSRP: $360

Sound Sample:  Click on the following link to listen:

   D7_sound_sample

Note: The above sample was recorded without any equalization. Slight reverb was applied.

K/\M i2n

KAM i2n are very versatile percussion and instrument condenser microphone. With frequency response of 20Hz to 20KHz. i2n has sound quality improvements over i2 due to newly developed compound layer capsules, yet we have reduced the price compared to i2 models they are a successor to..

      Bass roll-off switch to reduce background noise for overhead drums and non-bass instruments

       Each i2n mic includes two capsules: cardioid uni-directional and an omni directional capsule.

       I2n can be used for recording any instruments, including acoustic guitars, guitar and bass amplifier cabinets, and even vocals (with included pop filter).

      The omni directional capsules are great for over-head recording of drums in the studio since they cover the entire set. The cardioid capsules are appropriate for close micing of  cymbals in live situations since they can be pointed away from monitors and PA speakers to reduce feed-back problems.

MSRP: $106

 

 

K/\M i2

K/\M i2 is very versatile FET condenser microphone. It includes a  -10db attenuation switch and a Bass roll-off switch witch filters low frequencies under 80 Hz at 12db per octave. It comes with one cardioid and one omni-directional capsules, wind screen, and clip.  With wide frequency response of 20 Hz to 20KHz, If you are going to have only two microphones for every application, a pair of these would be ideal! Requires 48 volt phantom power.

Applications: Drum overheads, Cymbals, Acoustic guitar,  Brass instruments, Vocals, Orchestras, Guitar and Bass cabinets.

Specifications: 

bullet

Frequency response: 20Hz to 20 KHz

bullet

Sensitivity: -40db (0db=1V/Pa, at 1000 Hz)

bullet

Impedance: 250 Ohms

bullet

Self noise < 23 db (A weighted)

MSRP: $119

K/\M BD2

Specifically designed for Bass drum and Bass sources, BD2 not only delivers a deep bass, but also has a peak in mid frequency to capture the transient attack of a kick pedal or initial pluck of a bass string. If you have had problems making bass drum or bass guitar stand out in the mix, BD2 is designed to solve those issues. 

Applications: Bass drum, Bass guitar cabinet.

 

Specifications: 
bullet

Type: Dynamic, with internal vibration insulation

bullet

Pattern: Cardioid

bullet

Max SPL: 136 dB (for 0.5% THD)

bullet

Sensitivity: -60 dB

bullet

Frequency response: 20Hz - 15KHz

bullet

Self noise < 22 dB (A weighted)

bullet

Impedance: 80 Ohms

MSRP: $89

K/\M ST2

ST2 was designed to deliver a lively Snare and Tom sound.  With high SPL handling and internal vibration insulation, it can capture all the attack of the drums and minimizes unwanted noise. Designed for close micing,  as a by product, this mic is excellent for  electric guitar cabinets! It delivers a warm and full guitar sound while reducing hiss and unwanted background noise leakage.

Applications: Snare, Tom, Guitar cabinet

 

Specifications: 
bullet

Type: Dynamic, with internal vibration insulation

bullet

Pattern: Cardioid

bullet

Max SPL: 136 dB (for 0.5% THD)

bullet

Sensitivity: -55 dB

bullet

Frequency response: 30Hz - 15KHz

bullet

Self noise < 22 dB (A weighted)

bullet

Impedance: 300 Ohms

MSRP:  With Clamp: $61 - Without Clamp: $49

  Prices and specifications are subject to change without notice.